Radio Shack 60-2809 - Manual (Page 2)

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult your local RadioShack store or an experienced
radio/TV technician for help.
• If you cannot eliminate the interference, the FCC
requires that you stop using your vehicle.
• Changes or modifications not expressly approved
by RadioShack may cause interference and void the
user’s authority to operate the equipment.
This product is warranted by RadioShack against manufacturing defects in
material and workmanship under normal use for ninety (90) days from the date
of purchase from RadioShack company-owned stores and authorized RadioShack
franchisees and dealers. For complete warranty details and exclusions, check
with your local RadioShack store.
RadioShack Customer Relations
200 Taylor Street, 6th Floor, Fort Worth, TX 76102
04/04
©2004. RadioShack Corporation.
All rights reserved. RadioShack and
RadioShack.com are trademarks
used by RadioShack Corporation.
60-2809
04A04
Printed in China
The FCC Wants You to Know
limited 90-day warranty
• Running your vehicle for long periods of
time can generate high heat levels, resulting
in wear and tear on the motor. When the
battery power dies in your vehicle, let the
vehicle cool for 10 minutes before replacing
the batteries.
• If the motor runs, but the vehicle does
not respond to the transmitter, move the
transmitter closer to the vehicle and try
again.
• If someone is using a CB nearby, it may
cause interference. Move your vehicle away
from the CB.
• You cannot operate your vehicle near
devices with transmitters that use the same
frequency (27/49 MHz).
• Dispose of old batteries promptly and
properly.
• Do not burn or bury batteries.
• Use only fresh batteries of the required size
and recommended type.
• If you do not plan to use the vehicle for
a week or more, remove the batteries.
Batteries can leak chemicals that can
damage electronic parts.
helpful hints vehicle designs
Assemble your own airplane
to jet down the runway.
Build a sporty roadster for
a day at the racetrack!
Configure a helicopter so you
are ready to go anywhere!
Create this submarine for
submerged sailing adventures!