Rosewill RC-600 User Manual
Page 7
USB 2.0 Cardbus Adapter
RC600 User Manual
8
3.
After you have rebooted,
Please open the VIA VT6212L
PCMCIA CardBus Driver
Folder “\RC-600” on the
Driver CD, then double-click
the installation file
“Setup.exe”. Follow on-screen
instruction, then reboot. This
will automatically install driver
for the “PCI Universal Serial
Bus” device you found on step
3.
4.
Once you have rebooted, your USB 2.0 CardBus Card is ready for operation. Open Device
Manager, you will see the newly installed devices below.
Windows 2000 Installation
To use the VIA VT6212L PCMCIA 4 port USB 2.0 Card on Windows 2000, follow the steps through.
Windows 2000 operating system natively support this PCMCIA 4 port USB 2.0 Card-No Drivers are necessary!
However, please ensure you have the latest Service Pack installed…
• Windows 2000 – Service Pack 4
Confirming the Installation of the Driver
When you start the Notebook PC, the drivers are installed automatically by the Hardware Wizard. To confirm the driver
Installation, follow the steps through.