Unpacking tools needed, Warning – Ryobi bts20r User Manual
Page 9
Page 9
The saw is factory set for accurate cutting. After assem-
bling it, check for accuracy. If shipping has influenced the
settings, refer to specific procedures explained in the opera-
tion and maintenance sections of this manual.
Your Model BTS20
R Table Saw is shipped complete in one
carton and includes a rip fence, a miter gauge, a blade
guard, wheels, and hub caps.
Separate all parts from packing materials and check each
one with the illustration and the list of Loose Parts to make
sure all items are accounted for before discarding any
packing material.
Important: Remove the foam block from between the saw's
housing and the motor.
If any parts are missing, do not attempt to assemble the table
saw, plug in the power cord, or turn the switch on until the
missing parts are obtained and are installed correctly. Call
1-800-525-2579 for assistance if any parts are missing or
damaged.
#2 PHILLIPS
SCREWDRIVER
FRAMING SQUARE
1/2 in.
WRENCH
Fig. 2
UNPACKING
TOOLS NEEDED
WARNING:
If any parts are missing, do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.