Mounting the system – Radio Shack System 350 User Manual
Page 14
14
Connecting to an Answering Machine
1. Disconnect the phone line cord that connects your
answering machine to the phone line from the answering
machine’s jack. Then plug it into the system’s
TO LINE
jack.
2. Plug one end of the supplied line cord into the system’s
TO
PHONE
jack.
3. Plug the cord’s other end into the answering machine’s
jack.
4. Set your answering machine to answer after two or more
rings. This gives the System 350 time to record the call
information that the phone company sends between the
first and second rings.
MOUNTING THE SYSTEM
You can place the system directly on a desk, shelf, or table by
itself or with the supplied mounting bracket. Or, you can use the
bracket to mount the system on a wall.
Answering Machine
To Phone
TO LINE
Jack
TO PHONE
Jack
Phone Jack
Line Jack
43-991A.fm Page 14 Tuesday, December 28, 1999 7:59 AM