RCA L22HD32D - Manual (Page 23)

23
PC Setting >>
DNR On
Picture
Picture Setting >>
Picture Preference Sports
Picture Size >>
Film Mode On
: Adjust : Select
4
Press EXIT/CANCEL to return to the normal
screen.
Picture control
adjustment in the PC mode
You can adjust to optimize the performance of
the TV in the PC mode.
1
Press INPUT SELECT, then press ▲/▼ or
Number button (4) to select the PC mode.
2
Press SETUP/TV MENU. The TV menu screen
will appear.
3
Press ▲ or ▼ to select “Picture”, then press ▶ or
ENTER.
4
Press ▲ or ▼ to select “PC Setting”, then press ▶
or ENTER.
The PC Setting menu will appear.
Ver Position
Clock
Phase
: Adjust
25
0
25
PC Setting
Hor Position 25
: Select ENTER:Set
5
Press ▲ or ▼ to select the desired item you want
to adjust.
6
Press ◀ or ▶ to adjust the setting.
Hor
Position:
To adjust the horizontal position of
the image on the PC mode.
Ver
Position:
To adjust the vertical position of the
image on the PC mode.
Clock: To minimize any vertical bars
or stripes visible on the screen
background.
Phase: This must be adjusted after the
frequency of the PC mode has
been set to 60Hz to optimize
picture quality (page 38).
7
After adjusting, press ENTER to return to the PC
Setting menu. Then continue to adjust the other
items.
8
Press EXIT/CANCEL to return to the normal
screen.
NOTE:
If no buttons are pressed for more than approx. 60
seconds, the Menu-screen will return to normal
Monitor-screen automatically.
The PC settings are not effective for other input
modes.
•
•
DNR
DNR (Digital Noise Reduction) can reduce
the roughness of the picture. (This function is
available only for analog broadcast.)
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press ▲ or ▼ to select “Picture”, then press ▶ or
ENTER.
3
Press ▲ or ▼ to select “DNR”. Press ◀ or ▶ to
select “On” or “Off”.
Picture Preference Sports
Picture Size >>
Film Mode On
Picture
Picture Setting >>
PC Setting >>
DNR On
: Adjust : Select 4
Press EXIT/CANCEL to return to the normal
screen.
Sound control
adjustment
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press ▲ or ▼ to select “Audio” , then press ▶ or
ENTER.
3
Press ▲ or ▼ to select the item you want to
adjust.
Treble
Balance
MTS Stereo
Audio Language No Info.
HDMI Audio HDMI
Audio
15
0
: Adjust
15 Bass
: Select
Bass: Press ◀ or ▶ to adjust the bass sound.
Treble: Press ◀ or ▶ to adjust the treble sound.
Balance: Press ◀ or ▶ to obtain an equal sound
level from both speakers.
Press ▲ or ▼ to change the adjusting item. •
4
After you desired setting, press EXIT/CANCEL to
return to the normal screen.
Selecting Stereo/Second
Audio Program (SAP)
The multi-channel TV sound (MTS) feature
provides high-fidelity stereo sound. MTS also
can transmit a second audio program (SAP)
containing a second language or other audio
information.
When the TV receives a stereo or SAP broadcast,
the word “Stereo” or “SAP” displays on-screen
every time you press DISPLAY.
51H0101A_eng.indd 23 51H0101A_eng.indd 23 2/26/08 9:47:43 AM 2/26/08 9:47:43 AM