Regency I3100 - Manual

190 June 2007 Regency Product Specifi cations Book
W
ood Inser
ts
Wood Inserts
I3100 Wood Insert
I3100 Large Wood Insert
Minimum Fireplace Opening
Height 25” (635mm)
Width 28” (711mm)
Depth 17” (432mm)
Faceplate Dimensions
Standard 44” (wide) x 32” (height)
Oversize 50” (wide) x 34.5” (height)
Dimension Description I3100
A Adjacent Side Wall (to side) 13” (330mm)
B Mantle (to top)** 19” (480mm)
C Top Facing (to top) 18” (455mm)
D Side Facing (to side) 6-1/2” (165mm)
E Minimum Hearth Extension* 16” (406mm)
F Minimum Heath Thickness* 1-1/2” (38mm)
G Minimum Hearth Side Extension 8” (205mm)
Side and Top facing is a maximum of 1-1/2" thick.
Floor protection must be non-combustible, insulating material with an
R value of 1.1 or greater.
* If the hearth extension is fl ush with the fl oor (F) it must extend
19-1/2" in front of the body face (E).
Note: Hearth Extension Width (G) is measured from edge of fuel
door to side of hearth.
** A non-combustible mantel may be installed at a lower height if the
framing is made of metal studs covered with a non-combustible
board.
3-7/8"
to front
face
1-3/8"
I3100 Di i
32-5/16"
27-3/4"
12-7/8"
6-7/8"
3-1/8"
9-7/8"
6" Dia.
Flue
Faceplate
16"
27-1/2"
Firebox height is 22-3/4" at highest point