Using an earphone, Using an external speaker/microphone, Using the wrist strap – Radio Shack MTX-103 User Manual

Page 7: Using the belt clip

Advertising
background image

7

USING AN EARPHONE

To listen privately or to hear better in a
noisy area, remove the plug from the

SPK

jack on the right of the transceiver

and plug a monaural earphone (such
as Cat. No. 33-175) into the jack. This
automatically disconnects the internal
speaker.

USING AN EXTERNAL
SPEAKER/MICROPHONE

An external speaker/microphone (such
as Cat. No. 19-310) can make it easier
to use the transceiver when you clip it
to your belt. Remove the plugs from
the

MIC

and

SPK

jacks. Then plug the

speaker/microphone’s connector into
the jacks. This automatically discon-
nects the internal speaker.

USING THE WRIST
STRAP

Clip the supplied wrist strap to the wrist
strap tab, as shown. Then simply slip
the strap over your hand.

USING THE BELT CLIP

You can use the supplied belt clip to
make the transceiver easier to use
when you are on the go. Use the two
supplied screws to attach the belt clip
to the transceiver. Slide the belt clip
over your belt or waistband.

19-1004.fm Page 7 Tuesday, August 3, 1999 9:11 AM

Advertising