RocketFish RF-WHP01 - Manual (Page 17)

17 RF-WHP01/WHP02
Connecting the AC adapter to the docking station
Caution: To avoid risk of fire, and to prevent damage, only use the AC adapter
supplied with your digital wireless stereo headphones. Make sure that power supply
outlet matches the AC adapter’s 120V before making the connection.
To connect the AC adapter to your docking station:
1 Connect the AC adapter connector to the docking station DC IN jack.
2 Connect the AC adapter plug to a wall outlet.
Caution: Plug the AC adapter into the wall outlet only after all other connections are
completed.
Using your system
Installing or replacing headphone batteries
The headphones are powered by two AA rechargeable batteries. One
battery is housed in the left earpiece and one battery is housed in the
right earpiece.
Notes:
• Do not install non-rechargeable batteries.
• Make sure that all batteries are installed correctly.
CONNECT
R L AUX INPUT R L AUX OUTPUT DC IN 5 V
VOL
DC IN
5 V
Docking station
back panel
Connect to wall
outlet
08-1077 RF-WHP01-WHP02.book Page 17 Thursday, March 27, 2008 1:29 PM