Ricoh Caplio R40 - Manual (Page 115)

113
Chan
gi
ng Cam
era
S
e
ttings
Assigning a Function to the ADJ. Button
(ADJ BTN. SET.1/2)
Pressing the ADJ. button enables you to display the screens for
setting the exposure and white balance with fewer button
operations.
You can also use [ADJ BTN. SET.1] and [ADJ BTN. SET.2] to add a
camera function that can be activated by pressing the ADJ. button.
To assign a function to either [ADJ BTN. SET.1] or [ADJ BTN. SET.2],
follow the steps below.
1.
Display the SETUP menu.
For the operating procedure, see P.109.
2.
Press the " button to select [ADJ BTN. SET.1] or [ADJ BTN.
SET.2], and then press the $ button.
3.
Press the !" buttons to select
the desired setting.
4.
Press the C/D or # button.
5.
If you pressed the # button in
Step 4, press also the
C
/D button.
This setting is used until it is changed.
Reference
For information on how to use the ADJ. button, see P.57.
Available Settings Refer to
OFF *Default setting for [ADJ BTN. SET.2] -
ISO (ISO SETTING) *Default setting for [ADJ BTN. SET.1] P.81
QUALITY (PIC QUALITY/SIZE) P.60
FOCUS P.64
SHARP (SHARPNESS) P.68
METERING (PHOTOMETRY) P.67
AUTO BKT (AUTO BRACKET) P.70
CONT MDE (CONT. MODE) P.87
WITH SND (IMAGE WITH SOUND) P.76