Roberts Radio BAB MP-24 - Manual (Page 38)

37
Software version
The software display cannot be altered and is just for your reference.
1. To view which software version your sound system has ensure your
sound system is in DAB mode and press the Menu button to enter
the menu setup.
2. Press the Skip Up or Down buttons until "SW Version" together with
the Version number appears on the display.
System Reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete, carry out the following procedure.
1. While in DAB or FM mode press and hold the Menu button until the
display shows "Press SELECT to confirm reset".
2. Press and release the Select button to select system reset.
A full reset will be performed and the station list together with any preset
stations will be erased.
In case of malfunction for any reason, just reset the product to resume
normal operation. It may be necessary in some cases to disconnect the
mains power and then reconnect after 10 seconds.
In case of malfunction due to electrical fast transient (Burst), just reset the
product (reconnect of power source may be required) to resume normal
operation.
1
2 2
1
2