Warranty, Troubleshooting, Cleaning, care & maintenance – Remington DT-500 User Manual

Page 2: How to use, Grooming tips

Advertising
background image

Warranty

Limited Two-Year Warranty

Spectrum Brands, Inc. warrants this product against any defects that are due

to faulty material or workmanship for a two-year period from the original date

of consumer purchase. This warranty does not include damage to the product

resulting from accident or misuse.

If the product should become defective within the warranty period, we will repair

it or elect to replace it free of charge. Return your product and sales receipt

with your name, address and day time phone number to: Spectrum Brands, Inc.,

Attention: Consumer Services, 601 Rayovac Drive, Madison, WI 53711. For more

information call 800-736-4648 in the U.S. or 800-268-0425 in Canada.

KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
This warranty does not cover products damaged by the following:

Accident, misuse, abuse or alteration of the product

Servicing by unauthorized persons

Use with unauthorized accessories

Any other conditions beyond our control

No responsibility, obligations, or liability is assumed for the installation or

maintenance of this product.

SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,

SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS

PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED

WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION

TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.

This warranty gives you specific legal rights and you may also have other rights

which vary from state to state or province to province. Some states do not allow

the exclusion or limitation of incidental, special or consequential damages.

Spectrum Brands, Inc. Money-back Offer

If within 30 days after you have purchased your Remington

®

branded product,

you are not satisfied and would like a refund, return it with the sales slip indicat-

ing purchase price and date of purchase to the retailer from whom it was pur-

chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product

within 30 days from the date of purchase. If you have any questions concerning

the money-back guarantee, please call 800-736-4648 in the U.S. or 800-268-

0425 in Canada.

Troubleshooting

Q: WHAT IF THE CUTTERS DON’T MOVE WHEN TURNED ON?
A:
The cutting unit may be dirty or clogged. Clean and lubricate the groomer as

described previously.

Q: WHAT IF THE GROOMER DOESN’T WORK AT ALL WHEN TURNED ON?
A:
Check to make certain the batteries are inserted correctly. Always use newer

batteries for best performance. Should these tips prove unuseful, contact

customer service at 1-800-736-4648 in the U.S. or 800-268-0425 in Canada

for assistance.

Questions or comments: Call 800-736-4648 in the U.S. or 800-268-0425

in Canada or visit

www.remington-products.com

® Registered trademark of Spectrum Brands, Inc., or one of its subsidiaries.

©2008 SBI 03/08 Job# CS35782

Dist. By: Spectrum Brands, Inc., Madison, WI 53711

Dist. By: Spectrum Brands, Inc., Mississauga, ON L4W 2T7

MADE IN CHINA

T22-26422

NOTE: Always clean Grooming System attachments regularly to ensure maxi-

mum performance and a proper operating life.

CLEANING ATTACHMENTS WITH WATER
1.
Remove attachment.
2. Rinse ONLY the attachment under warm running water. Do NOT use hot water

as this might case damage.

CLEANING ATTACHMENTS WITH BRUSH

After first removing attachment, thoroughly brush and blow out hair clippings

from cutter system, attachment, and top of power handle.

OILING BLADES & CAUTIONS

Rinsing attachments under water (above) requires lubricating the cutting blades

1x monthly. Using only light-grade oils (e.g. sewing machine oil), simply spread

1-2 drops lightly over cutters with fingertip. Wipe away all excess.

Use only light-grade oils as these will not evaporate nor slow down speed of

cutting blades.

Do not use hair oil, grease, or any oil mixed with kerosene nor solvent as these

too will evaporate.

MAINTENANCE

This appliance contains no user-serviceable parts.

Cleaning, Care & Maintenance

1. Select attachment that best fits your personal grooming needs.
2. Place attachment atop Groomer Body. Secure by carefully turning attachment in

a clockwise direction (NOTE: attachment is secure when the arrow aligns with

circle).

3. To remove attachment, follow Step 2 in reverse order.
4. Slide On/Off Switch upward to power the Personal Groomer.
5. The Adjustable Comb attachment is to be used with the large 31mm Trimmer.

To add, align the Comb side rails with slots of Trimmer head. Secure Comb by

sliding downward, away from blade head. (NOTE: a clicking noise means Comb

attachment is secure and ready for use).

How To Use

HAIR:

Should be dry and free of lotions or other liquids.

Comb outward to obtain maximum height / length and facing in the same

direction.

BEARD (31mm Trimmer):

When TRIMMING, start under chin, following the jaw line back toward ear.

When THINNING or TAPERING, use a small comb to hold beard in place. In

opposite hand, hold Groomer with cutting system facing outward while slowly

moving Trimmer along length of comb.

MUSTACHE (8mm Trimmer):

Use small comb to straighten hairs for trimming.

Lightly touch cutting blades to mustache. Trim in multiple directions to capture

all stray hairs.

Grooming Tips

35782_DT-500_IBA.indd 2

3/26/08 10:47:17 AM

Advertising