Comparison with predecessor – Ricoh MP C7500 User Manual
Page 10
10
Comparison with Predecessor
Comparison with Predecessor
The Aficio MP C6000 replaces the Aficio
3260C and the Aficio MP C7500 replaces the
Aficio 5560C. Although based on a similar
platform, the new products are significantly
better than their predecessors.
Improvements
Increased productivity due to faster
engine speeds, a reduction in
calibration time and quicker warm up
process.
Improved image quality resulting from
to a newly designed development
system, fusing unit and new ultra-fine
PxP™ toner.
Operation is even easier than on the
predecessor models thanks to the
widescreen colour operation panel and
improved workflows.
The new models boast Improved paper
handling specifications with the ability to
feed 216 g/m² paper from standard
trays and A3+ paper via the new A3
LCT.
Professional finishing options like the
Plockmatic booklet maker, GBC
StreamPunch and Z-folding are
supported on the new models.
The new machines can be configured
with a fax option and have upgraded
scan, print, fax and security features like
other recently launched Aficio MFPs.
Higher productivity
Enhanced Image Quality
Easier operation
Better paper handling specifications
Professional finishing options
Fax functionality and the latest scan, print and security features
Higher Productivity
The engine speed has been increased to
60/55 ppm (B&W/Col) and 75/70 ppm (B&W/
Col) for the MP C6000 and MP C7500, making
the MP C7500 the fastest machine in its class.
A new fusing unit using a specially designed
thin fusing roller works in with the new PxP™
low fusing temperature toner to dramatically
reduce warm up time. The Aficio MP C6000
and MP C7500 are ready to print less than 75
seconds after power up which is faster than
any competitor in their class. The lower fusing
temperature also helps reduce overall power
consumption.
The Cycle Down Time (process control and
self check time) of the new machines
(2)
and
(3)
has been drastically reduced from that of
the predecessor models
(1)
helping to
increase the overall productivity of these
machines to the highest in their class.