Radio Shack 49-1000 - Manual (Page 15)

15
Beyond the Basics
changing your Personal Identification
Number (PIN)
 Press Menu  /
and enter your old PIN.
 When you see “INSTALL” on your Security Console, press
Menu  / until you reach the “NEW PIN” menu.
 Press ok. You also can press 5 to go directly to the “NEW PIN”
menu.
 Enter your new PIN and press ok.
Note: Choose a PIN you are not likely to forget. If you forget
your PIN, you will not be able use the system. Contact your local
RadioShack store to find out how to reset your system.
Repeatedly press clear to back out of the menu. Confirm your
selection by pressing 1 for YES or 2 for NO. Pressing 1 takes you
back to the “HOME CONTROL” screen. Pressing 2 keeps you in the
“INSTALL” mode.
clearing your Security Console’s memory
 Press Menu  /
and enter your PIN.
 When you see “INSTALL” on your Security Console, press
Menu  /
until you reach the “MEMORY CLEAR” menu.
 Press ok. You also can press 6 to go directly to the “MEMORY
CLEAR” menu.
 Press Menu  / to select the desired sub-menu: (CLEAR ALL
SENSORS, CLEAR ALL REMOTES, and so on).
 Press ok after you select the desired sub-menu.
Repeatedly press clear to back out of the menu. Confirm your
selection by pressing 1 for YES or 2 for NO. Pressing 1 takes you
back to the “HOME CONTROL” screen. Pressing 2 keeps you in the
“INSTALL” mode.
setting Security Console options
 Press Menu / and enter your PIN .
 When you see “INSTALL” on your Security Console, press
Menu  / until you reach the “OPTIONS” menu.
 Press ok. You also can press 7 to go directly to the “OPTIONS”
menu.
49-1000 UG.indd 15 7/27/2004 6:49:38 PM