Rosewill G03-ATI9000 - Manual (Page 33)

30
The following troubleshooting tips may help if you experience problems. Contact your
dealer or ATI for more advanced troubleshooting information.
•
Check that the card is seated properly in the AGP slot.
• Ensure the display cable is securely fastened to the card’s display connector.
• Make sure that the monitor and computer are plugged in and receiving power.
• If necessary, disable any built-in graphics capabilities on your motherboard.
For more information, consult your computer’s manual or manufacturer.
(NOTE: Some manufacturers do not allow the built-in graphics to be disabled or to
become the secondary display.)
• Make sure you selected the appropriate display device and graphics card when you
installed the ATI driver.
• For more troubleshooting tips, right-click the ATI icon in the taskbar and select
Troubleshooting.
• If you have problems during bootup, start your computer in Safe Mode. In
Windows
®
98 or Windows
®
Me, press and hold the CTRL key until the
Microsoft
®
Windows
®
Startup Menu appears on the screen. Then select the
number for Safe Mode, and press Enter. (You can also use F8 to bring up the
Microsoft Windows
®
Startup Menu.) In Safe Mode, bring up the Device
Manager and check for duplicate display adapter and monitor entries if you are
only using one graphics card.
• For more assistance, use the Troubleshooting Guide located in the Windows
®
Help or contact your computer manufacturer.
ATI is a registered trademark of ATI Technologies Inc. in Canada, the United States and/or other countries. Windows is a
registered trademark of Microsoft Corporation in the United States and/or other countries. All other trademarks and/or registered
trademarks are the properties of their respective owners.