Radio Shack CR-320 - Manual (Page 5)

5
4. Rotate VOLUME to the desired
sound level.
5. To turn off the radio, set ON/OFF/
AUTO/ALARM to OFF .
USING THE ALARM
Setting the Alarm Time
You can set the clock radio so an
alarm sounds or the radio plays at one
or two different times (ALARM 1 and
ALARM 2).
Follow these steps to set the alarm
times.
1. Set ON/OFF/AUTO/ALARM to
AUTO or ALARM .
2. Set ALARM 1+2 to ALARM 1 .The
ALARM 1 indicator lights on the
upper left of the clock display.
illustration of VOLUME location
illustration of ALARM 1+2
location
3. While holding down ALARM SET,
repeatedly press SLOW FOR-
WARD or SLOW REVERSE to
advance or reverse the alarm
time. Or, to rapidly advance or
reverse the alarm time, hold down
ALARM SET and press FAST FOR-
WARD or FAST REVERSE .
4. Set ALARM 1+2 to ALARM 2 and
repeat Step 3 to set the second
alarm time. The
ALARM 2 indicator
lights on the lower left of the clock
display.
5. Set ON/OFF/AUTO/ALARM to
ALARM to have the buzzer sound
at the set time(s), or to AUTO to
have the radio turn on at the set
time(s). The alarm indicator lights
on the lower left of the clock dis-
play.
6. Rotate VOLUME for the desired
alarm or radio volume.
7. Set ALARM 1+2 to 1 , 1+2 , or 2 to
have the alarm sound at either or
both set times. The indicators for
the selected alarm(s) light.
To silence the buzzer or radio when it
sounds, set
ON/OFF/ALARM to OFF . If
you do not turn off the alarm or radio,
it continues to sound for 59 minutes.
illustration of ALARM SET,
REVERSE and FORWARD
locations
12-1621.fm Page 5 Monday, July 12, 1999 9:13 AM