2 the main menu, Sample bios version: e15), Bios setup program function keys – GIGABYTE GA-MA790FXT-UD5P User Manual

Page 39

Advertising
background image

- 39 -

BIOS Setup

2-2

The Main Menu

Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use
arrow keys to move among the items and press <Enter> to accept or enter a sub-menu.

(Sample BIOS Version: E15)

Main Menu Help
The onscreen description of a highlighted setup option is displayed on the bottom line of the Main Menu.
Submenu Help
While in a submenu, press <F1> to display a help screen (General Help) of function keys available for
the menu. Press <Esc> to exit the help screen. Help for each item is in the Item Help block on the right
side of the submenu.

•

If you do not find the settings you want in the Main Menu or a submenu, press <Ctrl>+<F1>
to access more advanced options.

•

When the system is not stable as usual, select the Load Optimized Defaults item to set
your system to its defaults.

•

The BIOS Setup menus described in this chapter are for reference only and may differ by
BIOS version.

BIOS Setup Program Function Keys

< >< >< >< >

Move the selection bar to select an item

<Enter>

Execute command or enter the submenu

<Esc>

Main Menu: Exit the BIOS Setup program
Submenus: Exit current submenu

<Page Up>

Increase the numeric value or make changes

<Page Down>

Decrease the numeric value or make changes

<F1>

Show descriptions of the function keys

<F2>

Move cursor to the Item Help block on the right (submenus only)

<F5>

Restore the previous BIOS settings for the current submenus

<F6>

Load the Fail-Safe BIOS default settings for the current submenus

<F7>

Load the Optimized BIOS default settings for the current submenus

<F8>

Access the Q-Flash utility

<F9>

Display system information

<F10>

Save all the changes and exit the BIOS Setup program

<F11>

Save CMOS to BIOS

<F12>

Load CMOS from BIOS

CMOS Setup Utility-Copyright (C) 1984-2009 Award Software

ESC: Quit

: Select Item

F11: Save CMOS to BIOS

F8: Q-Flash

F10: Save & Exit Setup

F12: Load CMOS from BIOS

Time, Date, Hard Disk Type...

MB Intelligent Tweaker(M.I.T.)

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

PC Health Status

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Exit Without Saving

Advertising