Raritan Computer SX - Manual (Page 131)

C HAPTER 12: C OMMAND L INE I NTERFACE 113
On the Remote Radius Server, the user’s configuration should contain the following line:
Filter-Id = "raritan:G{<local user group>}:D{<number for dialback>}"
Dialback with remote LDAP user. (OpenLdap v.2 & v.3)
Dialin and Dialback should be enabled on the device used for modem communication. Primary
(or/and Secondary) LDAP Server Settings should be configured correctly and enabled on the SX
device:
LDAP Server Settings
----------------------------------------
Primary Server
Enabled - true
IP Address - 10.0.0.188
Port - 389
Secret - root
Base DN - cn=root,o=bianor
Base Search - o=bianor
Auth Query String -rciusergroup
Dialback Query String - telephoneNumber
The Remote LDAP Server user’s configuration should be:
Dialback with remote TACACS user. (Tacacs+ v.4.0.3a)
Dialin and Dialback should be enabled on the device used for modem communication. Primary
(or/and Secondary) Tacacs Server Settings should be configured correctly and enabled on the SX
device:
Primary Server
Enabled - true
IP Address - 10.0.0.188
Port - 49
Secret - alabala
On the Remote Tacacs Server user’s configuration should own the following line:
user-dialback='129'