Ricoh Aficio 3235C EN - Manual (Page 23)

Setting Paper on the Bypass Tray
17
1
Setting thick paper or OHP
transparencies
Note
❒ Paper settings can also be set using
the printer driver. The following
procedures are not necessary
when setting paper sizes using the
printer driver.
❒ Paper size settings set using the
printer driver have priority over
those set using the machine's dis-
play panel.
❒ When the printer driver is not
used, make settings using the dis-
play panel.
Reference
For printer driver settings, see the
printer driver Help.
AAAA
Press the
{{{{User Tools/Counter}}}} key
on the control panel.
BBBB
Press [System Settings].
CCCC
Press the [Tray Paper Settings] tab.
DDDD
Press [
T T T TNext] to scroll through the
list.
EEEE
Press [Paper Type: Bypass tray].
FFFF
Select [OHP] or [Thick Paper]
GGGG
Press [OK].
The paper type selected is dis-
played.
HHHH
Press the
{{{{User Tools/Counter}}}} key.
Note
❒ The settings made will remain
valid until they are reset again.
After printing on OHP trans-
parencies or thick paper, make
sure to clear settings for the next
user.
JupiterC2EN-Print-F2_FM.book Page 17 Friday, December 17, 2004 8:17 PM