Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 309)

Log Commands — Log, List Trace, Call Detail Record 7-15
Octel Overture 200/300 Serenade 3.0 PB60014–01
Location Activity
To print the network location activity, enter the filter TY NET_MSG .
Message Activity
To print message activity that is currently in the CPT log using the LOG command, at the @ prompt type
LOG PR CPT Enter
To list all messages or specify a specific message number, type the filter MS .
@LOG PR CPT
Specify Print Option(s):
“S”tart <time>, “E”nd <time>, “L”ine <length>, “p”age <length> “\”
”C”ontinuous
Filters: PR TY EV AU MB MS SL UN LI SO D1 D2 D3 D4 D5
>MS 3000
In this example, this command displays all records for message 3000, from the beginning of the log until
the end.
Integration Activity
To display integration activity using LOG, specify the type of integration to trace; enter the filter TY X,
where X is the type of integration to trace. Enter TY INTG to show all integration activity:
- INTG_C . Card-based integration record (MIC, RIC, ATTIC, SL1, M1)
- INTG_CA . Card-based ANI integration record (MIC, RIC, ATTIC, SL1, M1)
- INTG_R . RS-232C integration record
- INTG_D . DTMF integration record
In addition to TY , the following filters can also be specified for integration:
- SL . Slot number for card integration
- UN . Unit number for card integration
- LI . Link number for card integration
- SO . Source of call (integration)
To display APlink activity using LOG , at the @ prompt type
@LOG PR CPT
Specify Print Option(s):
“S”tart <time>, “E”nd <time>, “L”ine <length>, “p”age <length> “\”
”C”ontinuous
Filters: PR TY EV AU MB MS SL UN LI SO D1 D2 D3 D4 D5
>TY AP S 97 7 9 11 25