Radio Shack 25-3097 - Manual (Page 14)

Opera
tion
14
of the scanner’s glass. Be sure to keep it within the
correct document size marker.
2. Double-click
q q q q ý
on the Windows taskbar. The
onscreen scanner control panel appears.
3. Click
s s s s
in the onscreen scanner control panel or
press
WWWW
on the scanner's control pad to scan the
image. The TWAIN Scanner box appears.
4. Under Scanner Settings, make any necessary
adjustments under General and Advanced, and then
click Scan .
After the image is scanned, wait at least ten seconds for the
word processing application to load.
'//
#+.
"
You can scan images or documents and then send them to
your e-mail program.
1. Place the paper face down on the scanner. Line up the
corner of the paper with the arrow at the inside corner
of the scanner’s glass. Be sure to keep it within the
correct document size marker.
2. Double-click
q q q q ý
on the Windows taskbar. The
onscreen scanner control panel appears.
3. Click
r r r r
on the onscreen scanner control panel or
press
V V V V
on the scanner's control pad for more than
one second to scan the image.
4. The scanned image is sent to your default e-mail
program and attached to a blank e-mail, ready to be
addressed and sent. Wait at least ten seconds for the
e-mail program to load.
2
4'('4'0%'5
1. Double-click
q q q q ý
on the Windows taskbar. The
onscreen scanner control panel appears.
2. Click Preferences to open the Flatbed Scanner Utility
Preferences box, select the Preferences tab, and then
check the boxes next to the desired settings for each
button on the onscreen scanner control panel, or the
scanner's control panel to applications for post
processing.