Runco LIGHTSTYLE LS-10D - Manual (Page 101)

External Control
Runco LS-10d Installation/Operation Manual 85
PRE
L
IMINAR
Y
Give Physical Address 0x83 –
√
Set Stream Path 0x86 –
√
Get CEC Version 0x9F –
√
Abort Message 0xFF –
√
User Control Pressed 0x44 –
√
User Control Released 0x45 –
√
Give OSD Name 0x46 –
√
Menu Request 0x8D –
√
Give Device Power Status 0x8F –
√
The DHD Controller does not transmit HDMI CEC control
messages from the “HDMI Audio Out” connector.
Table 6-3. CEC Commands Supported by the DHD Controller (continued)
Opcode Value
Supported? (
√ = Yes, – = No)
Initiator Follower
Note