OPPO Digital BDP-83 - Manual (Page 57)

S E T U P M E N U O P T I O N S
51
motion can be achieved by enabling this option, provided that the TV and the disc both meet the
conditions for the conversion. The available options are:
• On – Convert DVD to 24Hz frame rate when possible.
• Off (default) – Do not convert DVD to 24Hz frame rate.
NOTE
The result of DVD 24p Conversion depends heavily on the quality of the content. If the video
encoded on the DVD contains incorrect 3:2 cadence, cadence breaks caused by edits, or
heavy compression noise that can affect cadence detection, the result may have motion
judder or frame tearing. Should this happen, you need to turn off DVD 24p Conversion and
watch the DVD in its original frame rate.
8. HDMI Options: To configure video options that are unique to the HDMI output. This item
contains a sub-menu with multiple configuration options. Please refer to the HDMI Options
section on page 53 of this manual for details of each option.
9. Screen Saver: To turn on/off the screen saver function. The screen saver is designed to
minimize burn-in concerns for plasma and CRT display devices. The available options are:
• On – After about 3 minutes of inactivity, the player will show an animated OPPO logo
moving on a black background. This allows most areas of the screen to rest and gives all
areas an equal opportunity to refresh.
• Off – The screen saver will not be activated. Use this option if your TV does not have a
burn-in issue.
• Energy Saver – Video output will be turned off after 3 minutes of inactivity. Many
projectors and LCD TVs will go into a standby or sleep mode and turn off their projection
lamp or LCD backlight lamp, thus saving energy and prolonging the lamp life. When you
press any button on the OPPO remote control or the player’s front panel, the screen saver
will be cancelled and video output will be restored. If your TV is already in standby or sleep
mode, you may need to wake up the TV by pressing a button on its remote or control panel.
Picture Adjustment
Picture Adjustment is a special section of the Video Setup menu. It allows you to fine tune many picture
control parameters in order to achieve the optimal picture quality and visual result. To use Picture Adjustment,
press the SETUP button on the remote control to enter the player’s Setup Menu, and then choose “Video
Setup” – “Picture Adjustment”. The Setup Menu will be replaced by the Picture Adjustment menu:
Picture Mode
Brightness
Contrast
Hue (Analog)
Saturation
Detail Enhancement
Edge Enhancement
Noise Reduction
Y/C Delay
Border Level
0
0
0
0
0
0
0
0
0
-16
-16
-16
-16
-16
-16
0
-16
0
+16
+16
+16
+16
+16
+16
+8
+16
+16
Exit
Normal
To change a picture adjustment parameter, use the UP/DOWN ARROW buttons to highlight the
parameter, and use the LEFT/RIGHT ARROW buttons to change its value.