Omron Healthcare INTELLISENSE BP755 - Manual (Page 26)

26
Every time you complete a measurement the monitor stores the blood
pressure and pulse rate in the memory. The monitor automatically stores
up to 90 sets of measurement values (blood pressure and pulse rate).
When 90 sets of measurement values are stored, the oldest record is
deleted to save the most recent values.
ADVANCED AVERAGING FUNCTION
The monitor calculates the average reading based on the three most
recent sets of measurement values taken within 10 minutes of the most
recent reading.
TO DISPLAY THE AVERAGE VALUE AND THE MEASUREMENT VALUES
NOTE: If two sets of measurement values are stored in the memory for
the 10 minute period, the average is based on the two sets of
measurement values. If one set of measurement value is stored,
this is displayed as the average.
1. Press the Memory Down button . The average value symbol
( ) appears on the display when the average reading is shown.
®
USING THE MEMORY FUNCTION
BP755IM_E_SP_q6_R2.qxd 5/26/09 4:14 PM Page 26