OPPO Digital BDP-80 - Manual (Page 49)

S E T U P M E N U O P T I O N S
43
The preceding diagram should give a good description of the various elements and their context. In this
screen we could, for example, instruct you to set the Auto Play Mode parameter to Off in the Playback
Setup
section. To indicate where we were, you would see the following: Playback Setup > Auto Play Mode
> Off .
NOTE
It is possible that some setup items or selections are grayed-out and inaccessible. This can
be caused by the disc still being played back or interlocking with mutually exclusive setup
items. Please stop playback or eject the disc before trying to change these setup items. If
you still cannot access the setup item, please check for configuration conflicts and
consistency. For example, if “Video Setup > Primary Output” is set to “Component”, the
“Output Resolution” menu selections “Auto” and “Source Direct” will be grayed-out.
Setting “Primary Output” to “HDMI” will enable the “Auto” and “Source Direct” selections.
To access the player’s Setup Menu simply press the SETUP button on the remote control. Since some Setup
Menu options can become inaccessible when the player is playing a disc, it is recommended that you operate
the Setup Menu when playback is fully stopped or when there is no disc in the player.
1. Press the SETUP button on the remote control, and the TV screen displays the following:
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
SACD Priority
DVD-Audio Mode
Auto Play Mode
PBC
Parental Control
Language
Multi-Channel
DVD-Audio
On
On
Setup Menu
Exit
Configure playback preferences
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
SACD Priority
DVD-Audio Mode
Auto Play Mode
PBC
Parental Control
Language
Multi-Channel
DVD-Audio
On
On
Setup Menu
Exit
Set the audo play mode for CD and SACD
2. Press the UP/DOWN ARROW buttons to
select the section. There are 6 sections:
Playback Setup, Video Setup, Audio
Format Setup, Audio Processing,
Device Setup,
and Network Setup.
Press the ENTER button or the RIGHT
ARROW
button to enter the selected
section.
3. Press
the UP/DOWN ARROW buttons to
select the setup item to be changed, and
press the ENTER or RIGHT ARROW
button to change the setting. When the
scroll icon is shown at the top or bottom of
the Setup Menu, it indicates that there are
more menu items that can be accessed by
scrolling with the UP/DOWN ARROW
buttons.
For example, in the Playback Setup
section, you may use the UP/DOWN
ARROW
buttons to select the “Auto Play
Mode ” setup item, and press the ENTER
button to change the “Auto Play Mode”
setting.