Olympus 1200 - Manual (Page 54)

54
EN
Getting to know your camera better
The camera has been used in the same conditions from the time of purchase
• No date and time have been set for the camera at the time of purchase. Set the date and
time before using the camera.
g “Turn the camera on” (P. 6)
“ X Setting the date and time” (P. 36)
The battery has been pulled out of the camera
• The date and time settings will be returned to the factory default settings if the camera is left
without battery for approximately 3 days. Also, the date and time setting will be canceled
earlier than this if the battery has been in the camera for a short period of time. Before taking
important pictures, check that the date and time settings are correct.
There are several ways to focus, depending on the subject.
When the subject is not in the center of the frame
• Place the subject in the center of the frame, lock the focus on the subject, and then
recompose your picture.
• Set [AF MODE] to [iESP].
g “AF MODE Changing the focusing area” (P. 27)
The subject is moving quickly
• Focus the camera on a point roughly the same distance away as the subject you want to
shoot and lock the focus (by pressing the shutter button halfway). Then recompose your
picture and press the shutter button completely as the subject enters the frame.
• Under certain types of conditions, it is difficult to focus using auto focus. The green lamp on
the monitor lights, allowing you to check if the focus is locked.
In these cases, focus (focus lock) on an object with high contrast at the same distance as
the intended subject, recompose your shot and then take the picture. If the subject has no
vertical lines, hold the camera vertically and focus the camera using the focus lock function
by pressing the shutter button halfway, and then return the camera to the horizontal position
while keeping the button pressed halfway and take the picture.
The date and time have not been set
Shooting tips
Focusing on the subject
Subjects that are difficult to focus on
The green lamp
blinks.
The subject cannot be
brought into focus.
Subject with low
contrast Subject with an
extremely bright area
in the center of the
frame Subject without
vertical lines
Subjects at different
distances Fast-moving subject The subject is not in
the center of the frame
The green lamp lights,
but the subject cannot
be brought into focus.
d4351_e_0000_7.book Page 54 Wednesday, August 1, 2007 1:52 PM