Onkyo T-405X - Manual (Page 18)

18
T-405X
FM STEREO / AM TUNER
MEMORY TIMER BAND CLEAR
AUTO / MONO
STANDBY/ ON
TUNING
PRESET
CHARACTER DISPLAY
MEMORY
AUTO/MONO
√ PRESET®
† TUNINGπ
BAND
Listening to a stereo radio
station
When you tune in a stereo FM station, the STEREO
indicator lights up if the signal is sufficiently strong.
If the signal is weak, you can still listen to the
station in mono mode. In this case, tune in as
follows.
1
Press the AUTO/MONO button.
The MONO indicator lights up.
STEREO
MHz
Displayed
MONO
AUTO / MONO
CLEAR
2
Select the station you would like to
listen to using the TUNING † or π
button.
TUNING
Selecting preset stations
Follow the procedure below to select a preset
station stored in memory.
1
Select FM or AM using the BAND
button. (only for U.S. and Canadian
models)
BAND
Use the PRESET √ or ® button to
select the desired preset station.
PRESET
Clearing preset stations
You can clear preset stations from the preset memory.
1
Select the station as explained in
the previous section.
2
Press and hold the MEMORY but-
ton and press the AUTO/MONO but-
ton within a second.
“..... ..... ” appears on the display.
MEMORY CLEAR
AUTO / MONO
Note
If you fail to press the AUTO/MONO button while
holding down the MEMORY button immediately,
the AUTO MEMORY function will start operating.
Receiving stations