Outback Power Systems Excel 100 - Manual (Page 14)

14
Fit the Burner (A2) into the Body (A5)
ensuring the burner venturi tubes are over
the ends of the gas valves. They are a loose
fit and not a gas tight seal. Secure the
Burner with the Screws (D4);
A2
View looking underneath the body.
12
11
Excel 100 Excel 200 Excel 300
Excel 100 Excel 200 Excel 300
Remove the lower nut from the main electrode (A12) and insert the electrode with
the gas collector box into the hole in the bottom of the body. The open face of the
gas collector box must face towards the back of the barbecue body. Secure with
the nut removed earlier.
D4