Oki MB 460 - Manual (Page 41)

41 • Configuring your machine
Fax set up (MB470 MFP & MB480 MFP)
Your MFP has to be set up properly to allow faxing from the machine. The following
parameters must be set before using the fax function:
• Date and time
• Country code
• Local phone number
• Sender ID
See “Initial set up” on page 64 for details.
Network set up
The MFP must also be set up properly on your network to perform scan to e-mail and
other functions. In order for other network devices to find the MFP on the network,
the following network parameters have to be set.
1. IP Address Set:
2. IP Address:. . .
3. Subnet Mask:. . .
4. Gateway Address:. . .
5. DNS Server:. . .
6. SMTP Server:. . .
7. SMTP Port:25
8. POP3 Server:. . .
9. POP3 Port:110
Explanation:
1. IP Address Set:
Choose Auto to obtain IP/subnet/gateway addresses automatically from DHCP
server. After changing setting from Manual to Auto, the MFP will automatically
reboot the network card.
2. IP Address:
The Internet Protocol (IP) address assigned to your machine by your network
administrator.
Note
If you ran the Oki driver installer program from the CD-ROM you may
have already set the time zone, date and time (Windows only) via the
Panel Language Setup utility.