Onkyo MD-105TX - Manual (Page 36)

36
Editing the contents of an MD (continued)
To erase all tracks of an MD
1 Press the button.
2 Press the EDIT/NO button and turn the AMCS
knob to select “All Erase ?”
To cancel, press the EDIT/NO button or press
the button.
3 Press the AMCS knob. “All Erase??” is
displayed for confirmation.
4 Press the AMCS knob again.
When the erasing of all tracks on the MD is
complete, “Complete” appears in the display.
Note
While the TOC indicator is lit or flashing, do not
move or unplug the MD recorder.
Dividing a track
The following operation is possible when the
playback is in progress or paused.
1
Pause a track at the desired
dividing point.
2
Press the EDIT/NO button and
turn the AMCS knob to select
“Divide ?”
4
Fine-adjust the dividing point.
To fine-adjust the dividing point...
Turn the AMCS knob while listening to
the part that contains the dividing point.
You can adjust the point in the range of
–45 to +45 in steps described below. (The
step varies depending on the selected
recording mode.)
Adjustment step
SP: approx. 0.06 seconds
MONO and LP2: approx. 0.12 seconds
LP4: approx. 0.25 seconds
Dividing point
Play
PUSH TO ENTER ( )
AMCS
TRACK
3
Press the AMCS knob.
The point at which the track is to be
divided plays repeatedly, with “Rehearsal”
and “Position OK?” alternately shown on
the display.
EDIT/NO
PUSH TO ENTER ( )
AMCS
PUSH TO ENTER ( )
AMCS
MINIDISC RECORDER
STANDBY
CD
INPUT
DUBBING
PUSH TO ENTER ( )
AMCS
DISPLAY EDIT / NO YES
REC
STANDBY / ON
MD- 105 TX
REC MODE
EDIT/NO
AMCS
TRACK
To stop dividing a track
Press the EDIT/NO button until “Divide?”
disappears, or press the button.