Olympus VN-5500 EN - Manual (Page 3)

- 5 -
To Stop:
Press the STOP (4) button.
• The recorder stops in the middle of the file being played.
Fast Forward:
While the recorder is during playback mode, press and
hold the
9 button.
• When you release the 9 button, the recorder will resume
normal playback.
Rewind:
While the recorder is during playback mode, press and
hold the
0 button.
• When you release the 0 button, the recorder will resume
normal playback.
Notes:
• When the slow playback mode is selected, the [)] appears and, for the fast playback mode, [*]
appears on the display while the recorder is playback.
• The recorder stops playback when you press the STOP ( 4) button while playback in the slow/fast
mode, or when it reaches to the end of the file. If you once press the STOP ( 4) button and start
playback again, the recorder will playback files in normal speed as well.
While the recorder is during playback mode (playback
or playback in slow/fast mode), press the
9 or 0
button forwards or rewinds to the beginning of the
next file or the file being played respectively.
Notes
• If an index mark is encountered midway, playback begins at that
point. (See “Index Marks” for details)
Normal speed
Slow Playback
(-25%)
Fast Playback
(+50%)
While the recorder is during playback mode, press the
PLAY ( `) button.
h Changing Playback Speed:
h Canceling Playback
h Forwarding and Rewinding
Notes:
• The end of the file is located by pressing and holding the
9 button during fast forwarding.
The recorder will pause at the end of the file. If you do not release the 9 button, the recorder
will continue to fast forward.
• The beginning of the file is located by pressing and holding the 0 button during rewinding.
The recorder will pause at the beginning of the file. If you do not release the 0 button, the
recorder will continue to rewinding.
• When the index mark is shown in the middle of a file, it will stop temporarily in the position of the
index mark.
h Locating the Beginning of the File:
4 Press the + or – button to select the proper
sound volume.
• The display shows the volume level. You can choose
between [00] to [30].
To Resume Playback:
Press the PLAY (`) button again.
• Playback will resume at the point of interruption.
h Listening with Earphone
You can listen to files by connecting earphones to the earphone
jack. If an earphone is connected, the speaker doesn’t emit sound.
Sound will be played back monaurally.
Notes:
• To avoid irritation to the ear, insert the earphone after you turn
down the volume level.
• When you listen with the earphone during playback, do not raise
the volume too much. It may cause hearing impairment and loss
in hearing ability.
• Earphones are not supplied. You can use any standard 3.5mm
monaural earphone or headphone.
- 6 -
Erase
You can easily erase unnecessary files. Sequential file numbers are reassigned automatically.
h Erase All Files from a Folder
Notes:
• An erased file cannot be restored.
• If operation is not executed for 8 seconds during the setting, it will return to the stop status.
• Completion of erasing may take several seconds. Do not attempt to remove, replace battery
or attempt any other functions on the voice recorder during this period because data may be
corrupted.
1 While the recorder is during
stop mode, press and hold
the
DISP/MENU button for
1 second or longer.
h Basic Operation of the Menu Mode
Using the menu function, you can change various settings according to your preference.
Menu
4 Press the 9 or 0 but-
ton to select [ YES].
a File to be erased
5 Press the PLAY (`) but-
ton.
1 Press the FOLDER/INDEX button to select
folder.
2 Press the 9 or 0 button to select the
file to be erased.
3 Press the ERASE ( s ) button.
1 Press the FOLDER/INDEX button to select
the folder to be erased.
2 Press the ERASE ( s ) button twice.
h Erasing One File at a Time
3 Press the 9 or 0 but-
ton to select [ YES].
a Folder to be erased
4 Press the PLAY (`) but-
ton.
Menu setting screen
Move the selection one position down/decrease the
number
Move the selection one position up/increase the number
Move the
selection one
position to the
right Move the
selection one
position to
the left
Confirm the
setting
a
a