Safety sign locations and care – Outback Power Systems Hitch DOM-OBK03 User Manual
Page 6
GPS IM
PLEMENT GUIDAN
CE
®
4
Safety Sign Locations and Care
!
A
C
B
C
P/N DEC-MT4163 C
P/N DEC-HAZ01 B
P/N 60257 A
Safety Sign Care:
• Keep safety signs clean and legible at all times.
• Replace safety signs that are missing or have become
illegible.
• Replaced parts that displayed a safety sign should also
display the current sign.
• Replacement safety signs are available from your
distributor, dealer, or online at outbackguidance.com
Installing Safety Signs:
• Be sure that the installation area is clean and dry.
• Decide on the exact position before you remove the
backing paper.
• Remove the smallest portion of the split backing
paper.
• Align the decal over the specified area, and carefully
press the small portion with the exposed sticky backing
in place.
• Slowly peel back the remaining paper, and carefully
smooth the remaining portion of the decal in place.
• Small air pockets can be pierced with a pin and
smoothed out using the piece of decal backing paper.