Ogm (outgoing messages) – Oricom eco5200 Series User Manual
Page 32
28
ANSWERING MACHINE OPERATION
OGM (Outgoing Messages)
OGM (Outgoing Messages)
eco5200 has two OGM message modes:
OGM1 (Announcement One) mode:
Callers can hear a pre-recorded message “Please leave a message after the beep”
and the unit records the caller's message.
OGM2 (Announcement Two) mode:
Callers can hear the other pre-recorded message “Please call later”. Under this mode,
the caller will NOT have the opportunity to leave a message.
You can also record your own personalized greeting (from 3 seconds to 120 seconds).
Note:
The default setting is OGM1 (Announcement One).
OGM setting
Press
key to switch between OGM1 and OGM2.
Record OGM
1
. Press
key to select OGM1 mode or OGM2 mode.
2
.
Press and hold
ANS
key until you hear a long beep and see
light fl ash.
3
. Speak into the microphone (15cm from the base unit’s microphone).
4
. Press
key to stop recording, the machine will play back recording for
review.
5
. To recall the default OGM press X during OGM playback.
Note:
If the OGM is less than 3 seconds, it is not valid. The machine will stop
automatically after 2 minutes.