Oki 2426 - Manual (Page 48)

48
PS Gamma Adjuster
This option allows adjusting the gamma output, or toner density,
when printing a job. The Gamma Curve profile is sent to the printer
with the print job.
1. Because Gamma Curve profiles are tied to the displayed PPD
file, select the correct PPD file before proceeding.
2. To add an available Gamma Curve profile, highlight the
desired profile and press the Add button.
3. To remove a Gamma Curve profile from the PPD column,
press the Delete button, not the Remove button. Only use the
Remove button if you edit (using the Edit button) the profile
and wish to store it in the Available Gamma Curves column.
Mac9.1_SDMGamma.jpg