Oregon Scientific Pedometer with Calorie Counter PE316CA - Manual

PEDOMETER WITH CALORIE COUNTER
INSTRUCTION MANUAL
INTRODUCTION
Thank you for purchasing the PE-316CA Multi-function Pedometer with
Calorie Counter. This easy to use and lightweight pedometer has many
features and functions to maximize your enjoyment and the benefits of a
walking/running exercise program.
The features and functions of the PE-316CA include: the Pedometer that
counts every step taken, personalized adjustment for length of stride,
calculation of the total distance traveled and a calorie counter that
calculates the number of calories burned during your walk or run. The PE-
316CA is also lightweight and compact and includes a convenient clip to
attach the product securely to clothing.
FEATURES
1. Liquid crystal display (LCD)
A two-line multifunction LCD with three different display modes
2. Total steps taken
Maintains a running total of the total number of steps
3. Total distance traveled
Calculates the total distance walked or ran
4. Stride length adjustment
Allows the user to input their own length of stride
5. Calorie measurement
Calculates the number of consumed calories
6. Body weight adjustment
Allows the user to input their own weight used in the determination of
the number of calories consumed
7. Real Time Clock (12 Hour format)
Hour / minute display format
8. EL Backlight
Allows for easy reading in dim light.
9. Motion sensitivity adjustment
Allows the user to adjust the sensitivity of motion for increased
step counting accuracy.
LOCATION AND FUNCTION OF PARTS [FIG. A]
A. LCD
B. CALO Button
Calorie measurement and weight display mode
C. DIST Button
Total distance and stride length display mode
D. Backlight [ ] Button
Activates backlight
E. RESET Button
Resets steps taken, total distance, and calories consumed
F. HR / + Button
- Changes hour digits
- Use to increase personal weight and stride adjustment
G. MIN / - Button
- Changes minute digits
- Use to decrease personal weight and stride adjustment.
H. Motion Sensitivity Slide Switch
Increases or decreases the unit’s response to motion
I. Battery Compartment
Insert two (2 pieces) LR43 size batteries ( included )
J. Belt Clip
Clips to belt or clothing
K. Cover
Protects LCD panel
L Cover Release Button
Press to open protective cover
OPENING THE COVER
Holding the pedometer upright, grasp the clip with one hand and press the
COVER RELEASE button with the other.
BATTERY INSTALLATION: MAIN UNIT
1. Gently press and pull the battery compartment door.
2. Insert two (2 pieces) LR43 size 1.5V batteries or equivalent.[FIG. B]
3. Securely close the battery door cover.
Note: If not disposed of properly, batteries can be harmful.
Protect the environment by taking exhausted batteries to
authorized disposal stations.
HOW TO WEAR THE PEDOMETER
Attach the PE-316CA to attire at waist level. The PE-316CA must be
attached in a horizontal position. [FIG. C]
Note: Improper positioning of the pedometer may result in incorrect
measurements.
HOW TO SET THE TIME
1. Changing the hour digits. Using a stylus or other blunt object gently
press the HR / + Button to adjust the hours displayed.
2. Changing the minute digits. Place a stylus or blunt object onto the MIN/
- button and press. Using a stylus or other blunt object gently press the
MIN / - Button to adjust the minutes displayed.
THE STEP DISPLAY MODE
Once batteries are installed, the LCD will show the STEP display. [FIG. D]
The upper line displays shows the clock and the lower line shows the total
number of steps taken.
To clear the total steps taken:
Press RESET, the total steps returns to zero.
MEASURING STEPS CORRECTLY
Adjusting the motion sensitivity slide switch:
To count the number of steps taken, the PE316CA uses an internal motion
sensitive slide device. To make the unit more or less sensitive to motion,
reposition the motion sensitivity slide switch. To determine the proper
amount of motion sensitivity for an individual walking pattern, experiment
with different settings.
THE DISTANCE DISPLAY MODE
Press DIST, to enter the total distance display. When the total distance is
displayed, the top line will first show the stride-length. After approximately
5 seconds, the stride length display will default back to the time display.
[FIG. E & F]
To clear the total distance:
Press RESET, the total distance returns to zero.
To return to STEP display:
Press DIST after upper line switches to clock display
MEASURING DISTANCE CORRECTLY
Correctly measuring distance depends on accurately setting the average
length of an individual stride (stride length) and properly setting the
internal motion-sensitivity function.
Total Distance = steps taken x average step length
To enter the length of a stride:
1. Press DIST. to view the STRIDE length display.
2. Using a stylus or other blunt object gently press the HR / + Button to
increase the stride length or the MIN / - Button to decrease the stride
length.
Stride length can be set between 30 to 150 cm (or 11 to 60 inches).
Note: if no changes are made to the Stride function, the upper
line of the display will automatically return to the CLOCK
display after five seconds.
As an individual’s stride can vary, it is important to calculate the average
length of stride. To make this calculation, walk 10 steps and then divide the
total distance covered by 10. Enter the average stride number in the stride
length display.
THE CALORIE DISPLAY MODE
Press CALO to enter the total calories consumed display. When the total
calories consumed is first displayed, the top line will show the total body
weight. After approximately 5 seconds, the clock will replace the body
weight display. [FIG. G & H]
To clear the total consumed calories:
Press RESET, the second line of the LCD returns to zero.
To return to STEP display:
Press CALO after upper line defaults to the clock display
MEASURING CONSUMED CALORIES
CORRECTLY
The calculation of calorie consumption based on steps will vary depending
on weight, age, sex and other factors. This product is designed to use the
most important factor: weight as basis of calculation.
In [FIG. I] the graph show the relationship between the steps rcorded by
this produst and consumption of calories. You can set up your daily target
and walk according to your own pace.
To enter a body weight:
1. Press CALO to view the body weight display.
2. Using a stylus or other blunt object gently press the HR / + Button to
increase weight or the MIN / - Button to decrease weight.
Body weight can be set between 30kg and 150kg (65lbs to 340lbs).
Note: no changes are made to the body weight function, the
upper line of the display will automatically default to the CLOCK
display after five seconds.
SUGGESTED STEPS PER DAY
In order to keep fit, it is necessary for a person weighing 60 kg to walk
10,000 steps to consume 300 calories per day. The graph in [FIG. J] shows
the suggested consumption of calories with reference of different body
weight.
CUSTOMER ASSISTANCE
Oregon Scientific has made every effort to provide its customers with
products of the highest quality and easy to use manuals. However, should
you have questions or require further assistance, please contact our
customer service department at 800-853-8883. Or you may contact
customer service via email at [email protected].
WARRANTY
Oregon Scientific warrants that this product is free of manufacturing
defects for 90 days from date of retail purchase. Please return defective
product to the place of retail purchase; however, if this is not possible
contact our customer service department. Do not return defective product
to Oregon Scientific without first securing a return material authorization
through our customer service department.
Warranty does not cover product subjected to abuse, misuse, and accidental
damage or tampering with internal components.
SPECIFICATIONS
Real time clock : 12 hour format with hour / minute display
Step counter : 0 to 99,999 steps
Distance traveled : 0 to 999.99 km (0 to 999.99 miles)
Stride distance : 30 to 150 cm (1cm units) (11 to 60 inches)
Calorie Display : 0.1 – 9999.9 kcal
Body Weight Range : 30 – 150kg (65lbs to 340lbs)
Operation temperature: -10°C to 40°C (-14°F to 104°F)
Storage temperature : -20°C to 60°C (- 4°F to 140°F)
Power source : 2 x LR43 1.5V batteries or equivalent.
(included)
Product size : 32 (D) x 41 (w) x 63 (L)mm
[1.28"(D)x1.64"(W)x2.52"(L)]
Weight : 28g (0.98oz) (without batteries)
MAINTENANCE
1. Do not immerse the unit in water. If the unit comes in contact with
water, dry it immediately with a soft lint-free cloth.
2. Do not clean the unit with abrasive or corrosive materials.Abrasive
cleaning agents may scratch the plastic parts and corrode
the electronic circuit.
3. Do not subject the unit to excessive: force, shock, dust, temperature, or
humidity. Such treatment may result in malfunction, a shorter electronic
life span, damaged batteries, or distorted
parts.
4. Do not tamper with the unit’s internal components. Doing so will void
the unit’s warranty and may cause damage. The unit contains no
user-serviceable parts.
5. Only use new batteries as specified in this instruction manual. Do
not mix new and old batteries as the old batteries may leak.
Read this instruction manual thoroughly before operating the unit.
CAUTION
— The content of this manual is subject to change without further
notice.
— Due to printing limitation, the displays shown in this manual
may differ from the actual display.
— The contents of this manual may not be reproduced without
the permission of the manufacturer.
ENGLISH
PEDOMETER WITH CALORIE COUNTER
MODEL : PE316CA
INSTRUCTION MANUAL
FIG. A
FIG. B
FIG. C
FIG. I FIG. J
FIG. D FIG.E
FIG. H
FIG. F FIG. G
(24 inch) (20 feet)
6 m 60 cm
60 cm
(24 inch)
LR43
1.5V
LR43
1.5V
LR43
1.5V
LR43
1.5V