Oricom pro600 DECT - Manual (Page 30)

28
Advanced Settings
Advanced Settings
Setting the Recall time
Two recall timings are available. Short 100ms (Australia)
and Long 600ms (New Zealand).
, or , Open the Menu, select "Base settings"
or , Select "Recall"
Short The current setting is shown
or , save Select and confirm "Short" or "Long"
R button on PBX phone systems
If the telephone is connected to a PBX phone system
functions such as transferring calls and automatic call
back can be used via the R button.
R button and Supplementary services
Your telephone supports the supplementary services
offered by your telephone network provider, such as
call waiting and conference calls. The supplementary
services can be used in conjunction with the R button.
Please contact your telephone network provider with
regard to enabling the supplementary services and
which recall time must be used.
Dialling pause (PBX ONLY)
When using some PBX phone systems, it takes a little
time before the dial tone becomes available. It is possible
to insert a pause after the number for the outside line so
that the number can be dialled in a continuous process
without having to wait for the dial tone.
2 sec Insert a pause. "P" is shown in the
display.
Reset to default settings
You can reset your handset to its original default settings.
The phonebook, calls list and redial list are deleted when
you reset to default settings.
10 sec R>, Activate Reset
or Confirm or cancel
Pro_600_800.indd 28 2008-11-11 16:17:43