Olevia HD Multimedia Player ZP-500 - Manual (Page 5)

Product Overview
Panel Front side
LED/button/connector:
(1) USB port: These two USB 2.0 type A sockets are for the external USB Flash Disk, USB Mass
Storage, USB DVD-ROM or USB Wi-Fi Dongle.
(2) IR sensor:
It receives the command from remote control unit. Do not block the port.
(3) Power indicator:
It lights on when the power is plugged in.
(4) USB indicator:
It lights when the USB Storage is plugged in and ready. It may take 5 seconds to
ready when the USB storage is plugged in.
(5) POWER STANDBY: Press it to standby or wake up this player.
Panel Back side
Video connection: Please select one below to connect the TV set.
HDMI output: This port is to connect with HDMI receiver or HDMI TV set.
YPbPr:
This port is for the YPbPr input of TV set. Us the bundled phone jack to RCA jack cable to
connect.
VIDEO (CVBS):
This port is for the CVBS input of TV set.
AUDIO L/R:
These ports are the analog stereo audio channels to the input of TV set. If the HDMI is
connected, then you don’t need to connect AUDIO L/R.
S/PDIF: This is the TOSLINK digital output for audio.
Ethernet port: This is the Ethernet port for the sharing through Local Network.
DC IN:
It connects the DC input of the Power Adapter. The power requirement is 12Vdc, 1.5 A.
2.
1.
3. 4. 5.