Olympus C-211 - Manual (Page 132)

132
Taking a panorama...
When you select and press the OK button, the camera displays the panorama
shooting screen. The screen includes two rectangles along the side, and an arrow
showing the direction for connecting the panorama.
1
Set the camera on a tripod.
2
Use the arrow pad to set the panorama
arrow to point toward the next panorama
stitch.
: Connect to the right. Take the current
shot, then move camera to the right
for the next shot.
: Connect to the left.
: Connect up.
: Connect down.
3
Take the shot.
• Remember the composition of the shot, so
that you can correctly line up the next shot.
Pay special attention to the portion of the
image in the rectangle along the next stitch
edge.
4
Position the camera for the next shot, taking
care to get the correct amount of overlap.
• If you are connecting to the right, for
example, move the camera so that the
portion of the image that was in the right
rectangle is now in the left rectangle. (See
the diagram.)
5
Take the shot.
6
Now continue as necessary, repeating
steps 3 and 4 until you have completed all
the shots for the panorama.
Panorama shooting screen
2
Rectangle
Direction for connecting the
panorama.