Oricom T1000 - Manual (Page 8)

touch
6 7
2 Scroll or to select RINGER VOLUME and
press .
3 Scroll or to select EXTERNAL CALL or
INTERNAL CALL ringtone volume then press .
4 Scroll or to select the required volume and
press to confirm.
Key tones
1 Press , then scroll or , or press to
select PHONE SETUP and press .
2 Scroll or , or press to select KEY TONE
and press .
3 Scroll or to select from 4 key tones to silent
key tone and press to confirm.
Recall time
Only change this setting if your call waiting function does
not work. Select 100ms for use in Australia and 600ms for
use in New Zealand.
1 Press , then scroll or , or press to
select PHONE SETUP and press .
2 Scroll or , or press to select RECALL TIME
and press .
3 Scroll or to select the recall time you require
and press to confirm.
Smart key lock On/Off
Smart key lock prevents accidental activation of keys
during a call. When set to
ON , when you have dialled the
number and you hold the receiver to your ear the keypad
automatically locks. When you move your ear away from
the keypad the keylock deactivates again. We recommend
that smart keylock is left switched on to prevent accidental
dialling when using the handset.
1 Press , then scroll or , or press to
select PHONE SETUP and press .
2 Scroll or , or press to select SMART KEY
LOCK and press .
3 Scroll or to select ON or OFF and press to
confirm.
Manual key lock On/Off
Use the manual key lock to lock the keypad and prevent
accidental dialling at any time.
1 In standby mode, press then immediately press .
The symbol is displayed while the key lock is ON.
Press the and to turn off the keypad lock.
When the keypad is locked you will still be able to answer
incoming calls. Once the call has ended the keypad will
remain locked. Only the key functions when the key lock
is on. When the keylock icon is on, calls may still be made to
the official emergency number programmed in to your phone,
key in the emergency number and press directly.
Repeat steps above to turn off the keypad lock.
Auto Answer On/Off
When set to ON , incoming calls can be answered by lifting
the handset out of the cradle (without pressing ).
1 Press , then scroll or , or press to select
PHONE SETUP and press .
2 Scroll or , or press to AUTO ANSWER and
press .
3 Scroll or to select ON or OFF and press to
confirm.
Handset Name
1 Press , then scroll or , or press to
PHONE SETUP and press .
2 Scroll or , or press to HANDSET NAME
and press .
3 Enter a name using the keypad and press to
confirm.
Reset to Default Settings
All the settings you have made will be restored to the
default settings if you reset.
1 Press , then scroll or , or press to SET
DEFAULT and press .
2 Scroll or to select YES and press to confirm.