Sylvania SRDV495 - Manual (Page 68)

68
Recording
Settings for an external source (cont’d)
Before recording from an external source, see the instruction for the connection on page 67.
VCR VCR DVD-RW DVD-RW
VR
DVD-RW DVD-RW
Video
DVD-R DVD-R
Recording from an external source
1. Turn the TV and the DVD/VCR on, and be sure to select the
input of the TV to which the DVD/VCR is connected.
2. When you want to record to a disc: Press:
Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record onto, then press open/close again.
When you want to record to a tape: Press:
Insert the tape with a safety tab into the cassette compart-
ment.
3. Select the input (L1 or L2) to which the external equipment
is connected.
•To use the input jacks on the back of this unit, select “L 1” position by
pressing [ 0],[0],[1] on the remote control or the CH K / L buttons.
•To use the input jacks on the front of this unit, select “L 2” position
by pressing [ 0],[0],[2] on the remote control or the CH K / L but-
tons.
4. Select a recording speed using REC SPEED button. Refer to
“Recording speed” on page 56 for DVD or page 50 for VCR.
5. Press REC/OTR button on the DVD/VCR to start recording.
6. Press PLAY button on the external source that you are
recording from.
7. For disc:
Press STOP C button on the DVD/VCR to stop recording.
For tape:
Press STOP/EJECT C A button on the unit to stop record-
ing.
This operation may take a few minutes to complete.
SP SLP
VCR mode
XP SP LP
EP SLP
DVD mode
SEP
VCR
This operation may take a few minutes to complete.
DVD
POWER REC SPEED AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
1 2 3
4 5 6
7 8
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/: ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
ONE TOUCH
DUBBING
5
1 2
3
7
4