Olympus C-3040 - Manual (Page 2)

Doc. 000588, Rev. A Olympus C-3040 www.remotereality.com
Page 2 of 2
R EMOTE R EALITY
4 Technology Drive
Westborough, MA 01581
866-898-1010
Camera
Guide
Recommended Camera Settings for 360Plus
When taking 360x360 images, follow all of the above instructions, and the additional
instructions below. Because the 360Plus uses 4 images, it is best to make sure that all 4
images have the same exposure. This will ensure the end result will have a continuous
tone and density throughout the image. The best way to do this with the Olympus C-304
0 is to:
• Try to make the scene as evenly balanced with the same type of light as possible.
For example, close window shades to avoid harsh uneven lighting, and turn on
interior lights to try to balance the brightness.
• Set the white balance to a fixed setting. This will keep the camera from shifting
the white balance between shots if the scene has more than one type of lighting.
To do this, press the menu button on the back of the camera, and use the down
arrow to select WB, then the right arrow to see the choices for pre-set white
balance settings. Choose the correct pre-set option according to the scene you are
shooting. Your choices are Outdoor/sunny, overcast, tungsten, and fluorescent.
• To make sure your exposure is even in all 4 shots, set the camera to AE lock.
Press the menu button, then use the down arrow until you see the AE lock
mode/multi mode selection, to do this. Use the OK button to finalize your
selection. This will mean that your image will be properly exposed.
• Select the self-timer under Main Menu/ Drive/ Self Timer. Remember to set the
self-timer before each of the 360Plus images.
• Be sure to turn off the AE lock before moving on to your next scene.
• Use the bubble level to set the lens mount to a level position before taking the first
shot.
• Do NOT re-level between shots. It is normal for the bubble level to shift between
shots. Re-leveling is not necessary not recommended.
• When processing 360 Plus images in the RemoteReality software, use the
Olympus 2000 camera selection.