Oakley OMS-820 User Manual

Page 5

Advertising
background image

synthesiser. The PCB has four mounting holes, one in each corner should you require
additional support which you probably won’t.

The design requires plus and minus 15V supplies. These should be adequately regulated. The
current consumption is about 20mA, although this varies slightly as the OUT LED turns on
and off. Power is routed onto the PCB by a four way 0.156” Molex type connector. Provision
is made for the two ground system as used on all Oakley modular projects, and is compatible
with the MOTM systems. See later for details.

5

Advertising