Olympus C-200 Zoom EN - Manual (Page 131)

121
7
Transferring Y
our Pictur
es to a Computer
Do not leave the camera connected for an extended
period of time when using the batteries
The camera will automatically turn on when it is connected to the
computer. Also while it is connected, the camera will not go into standby
(power saving) mode.
If the battery power becomes insufficient while the computer is
uploading or downloading data from the SmartMedia card in the
camera, images (image files) on the card could be destroyed or an error
with the computer could occur.
Before connecting the camera to the computer, confirm that there is
enough battery power remaining. Also after the image files from the
memory card have been downloaded into the computer, quickly
disconnect the camera.
It is recommended that an AC adapter (sold separately) be used if the
camera is to be connected for extended periods of time.
Caution on using the AC adapter
Before connecting the AC adapter, always make sure that the camera is
turned off.
When disconnecting the AC adapter, first disconnect the camera from
the computer and confirm that the camera is turned off.
CAUTION
• Connecting the camera to a computer via a USB hub may cause unstable
computer behavior, depending on the compatibility between the hub and
computer. If this is the case, connect the camera to the computer directly,
without using the USB hub.
• Proper functioning of the USB cable cannot be guaranteed for computers
that have had their operating systems upgraded from Windows 95. Use
other transfer methods such as a floppy adapter (sold separately), etc.
(p.134).
• Proper operation cannot be guaranteed for computers that provide their
USB connector on an expansion card.
• Proper operation cannot be guaranteed for versions of Windows or Mac OS
other than those shown in the table.