Picture problems, The picture is out of focus, The picture is too bright – Olympus C-200 Zoom EN User Manual

Page 150: The picture is too dark

Advertising
background image

140

Picture Problems

The picture is out of focus

• The camera was jarred when the shutter button was pressed.

➜ Hold

the camera firmly and press the shutter button smoothly.

• The viewfinder AF target mark was not positioned on the subject.

Position the autofocus frame on the subject, or use the focus lock.

• The lens is dirty.

➜ Clean the lens with a soft, dry cloth.

• The mode was not selected correctly.

➜ Shoot in the macro mode

where the subject is within the range of 0.2m (8

″) to 0.8m (31″). For

greater distances, shoot in the standard mode.

• The shutter button was pressed while standing directly in front of the

camera when using the selftimer.

➜ When using the selftimer, press

the shutter button while looking into the viewfinder, not while standing
in front of the camera.

• The flash was needed to take a clear picture, but the camera was set

to No Flash.

➜ The shutter speed become slower and the exposure

time becomes longer, so use the tripod or hold the camera as steady
as possible to avoid camera movement.

• Quick Focus was used in the wrong focal range.

➜ Use the correct

Quick Focus setting for the distance you’re shooting at.

The picture is too bright

• The flash is set to fill-in flash mode.

➜ Set the flash a different mode.

• The subject being shot is excessively bright.

➜ Use the exposure

compensation feature, or change the angle of the camera.

The picture is too dark

• The flash was blocked by a finger.

➜ Hold the camera correctly,

keeping your fingers away from the flash.

• The subject was out of the working range of the flash.

➜ Shoot within

the flash working range.

• The flash mode is set to No Flash despite that lighting conditions

require a flash.

➜ Change the flash mode setting to one appropriate

for the surrounding lighting conditions.

• The subject was too small or was backlit.

➜ Set the flash to fill-in

mode, or use the spot metering mode.

• The picture was taken in the sequence mode.

➜ Pictures will appear

dark in the sequence mode because of the fast shutter speed,
especially in dim light.

Advertising
This manual is related to the following products: