Inserting the batteries – Olympus C-200 Zoom EN User Manual

Page 17

Advertising
background image

7

1

Getting Started

Inserting the Batteries

This camera uses four AA (R6) alkaline, NiMH, lithium or NiCd batteries.
It can also take two CR-V3 lithium battery packs. Do not use zinc-carbon
(manganese) batteries.
Do not mix different types of batteries or insert the batteries facing in
the wrong direction. As it may overheat and cause irreparable damage
to the camera.

1

Make sure the power is off.

• The lens barrier must be

closed.

• Make sure the monitor is off.

2

Slide the battery compartment
lock from

to

.

3

Slide the battery compartment
cover to the side and lift it up
to open.

4

Insert the batteries as shown
in the diagram.

• When using the lithium battery

packs, insert them so the
“CAMEDIA” label on each
battery is facing the lens side
of the camera.

• Some batteries may have an

insulation seal attached.
Remove this before using the
battery.

Using AA (R6)
alkaline batteries

Using lithium
battery packs

3

4

CR

-V

3

Insulation
seal

Do not remove
the silver label.

2

Advertising
This manual is related to the following products: