Olympus C-200 Zoom EN - Manual (Page 20)

10
Inserting the SmartMedia Card
Always insert a SmartMedia card (hereafter called “card”) before taking
pictures.
1
Make sure the power is off.
• The lens barrier must be
closed.
• Make sure the monitor is off.
2
Open the card cover.
3
Insert the card as shown in
the diagram, making sure that
it is pushed all the way in.
4
Close the card cover so it
clicks into place.
• If the card cover is not
properly closed, the camera
will not turn on.
To remove the SmartMedia card
Pull it in the opposite direction as that indicated in step 3.
Never open the card cover, eject the card, remove the batteries, or
disconnect the AC adapter while the camera power is turned on. Doing
so may destroy the image data on the card. Destroyed images cannot be
recovered.
When using non-Olympus brand cards
Use only 3V (3.3 V) cards. 5V cards can not be used.
Non-Olympus brand cards or cards formatted by computers or other
devices may not be recognized by the camera. Also, the time required for
writing to the card could become longer, or the number of possible shots
could be reduced. Before making use of the card, use the camera to
format it (p.116).
Insert the
SmartMedia card
2
3