Olympus C-200 Zoom EN - Manual (Page 29)

19
Checking the Monitor
Is the Card Inserted?
If you forget to insert the card, or if there is any other problem with the
card, the monitor will display a message. Read the message and correct
the problem.
When the “NO CARD” error
message is displayed:
• The card may not be inserted
properly.
• Turn the power off (p.34). Then
remove and re-insert the card.
For other error messages:
• Follow the directions on the
monitor. For details, see “Error
Codes” (p.142).
When the card setup
screen is displayed:
• You have inserted a card which
needs to be formatted. When a
card is formatted, all of the
recorded images on the card are
deleted.
For details, see “To Initialize
(Format) a Card” (p.116, 117).
2
Lear
ning the Basics
Monitor
Monitor (Card Setup)
GO
CARD SETUP
OK