Olympus C-200 Zoom EN - Manual (Page 38)

28
Taking Pictures Using the Monitor
1
With the lens barrier open,
press the monitor button (
).
• The monitor goes on.
2
Compose the shot using the
monitor.
3
The procedure for taking
pictures is the same as when
using the viewfinder (p.25,
26).
• The memory gauge is
illuminated on the monitor.
• No further pictures can be
taken when the memory
gauge is illuminated to indicate
that the memory is full. Wait for
several seconds until the
memory gauge is off before
continuing to take pictures.
4
To go off the monitor, press
the monitor button.
• To turn the power off, see
“Turning the Power Off” (p.34).
CAUTION
• Never remove the batteries or card, or disconnect the AC adapter while the
memory gauge is on. This could damage the pictures you have already
taken, as well as the one currently being written to the card.
1 4
2 3
HQ
Memory gauge
Memory gauge
Monitor
Before
shooting
1 picture Cannot
shoot
2 or more
pictures