Olympus VN-180 - Manual (Page 8)

8
1
1
3
MAX
MIN
4
Recording-Pause (REC PAUSE)
1 Press the REC button once
during recording to enter the
Recording-Pause mode.
During recording-pause,
[PAUSE] is shown on the LCD
and the red LED indicator blinks.
All recording will stop if the recorder is left in the Recording-Pause
mode for 10 minutes or if the STOP button is pressed during the
Recording-Pause mode.
2 Press the REC button again to resume recording.
Using the Recording-Pause mode allows you to continue recording
in the same message.
Playback (PLAY)
1 Press the MENU/FOLDER button
to select a folder (see page 13).
2 Press the ( ) or ( ) button
so that the LCD shows the
correct message number to be
played and its recording date/
time.
3 Press the PLAY button to start
Playback.
LCD display
For the first 2 seconds of
playback:
The length of the message is
displayed.
More than 2 seconds after the
start of playback:
The elapsed playback time of the
message being played is
displayed.
4 Adjust the volume to a suitable
level.
5 Press the STOP button to stop
playback and enter the Stop
mode. The recorder
automatically stops at the end of
each message.