Oreck Grab It & Steam It 22082-01 - Manual (Page 10)

10
E N G L I S H
Replacement Parts
Parts
What to do Problem Check
Service problems that
appear to be major can
often be solved easily.
You can be your own
troubleshooter by
reviewing this guide.
All other servicing
should be done by an
Oreck authorized
service center.
Unit has no power .
Very low or no steam
is emitted when the
steam cleaner is on.
Steamer still does not
operate properly.
• Appliance is not properly
plugged into an electrical outlet
or is not switched on.
• The electrical socket is faulty.
• The tank is empty.
• Despite the light, the steam
switch is not activated.
• Large debris has clogged the
inlet.
• The brushroll is set up with a
clutch.
• Check all the above points.
• Insert plug into an electrical outlet and switch the steam
cleaner on
• Check the socket by unplugging the steam cleaner and
plugging it into a different electrical socket.
•. Fill the water tank with water.
•Press down the steam switch fully.
• Clean debris from inlet
• If the brushroll stops/clogged, the clutch will allow the
brushroll motor to keep turning while the brushroll is
stopped. A clicking noise can be heard
• Contact Oreck Authorized Service Center.
All accessories and replacement parts are sold separately. To order, call our customer service
hotline or visit our website. Please have your model number from the data label on the bottom
of the unit.
Part Number Item
Pack of 4 Microfiber Pads SWSTEAMKIT
Replacement Water Filter SWSTEAMFLTR
Customer Service Hotline USA: 1-800-989-3535 Canada: 1-888-676-7325
website: www.oreck.com
Trouble-
shooting
Brushroll is not
turning.