Omron Healthcare GOSMART HJA-301 - Manual (Page 8)

8
SETTINGS
SETTING THE TIME, WEIGHT, HEIGHT AND STRIDE
LENGTH
The unit comes with the battery installed. When you use the
unit for the first time or you want to change settings, follow
the steps below.
For setting range details refer to “Specifications” on page 29.
NOTE:
Remove the protective film from the face of the display.
1. Press the SET button on the back
of the unit with a thin, sturdy, stick
that will not break easily.
Do not press the button with a sharp
point. This could cause damage to the
button.
The hour flashes on the display.
NOTE:
The display will turn off if no buttons are pressed after
5 minutes while setting the unit for the first time or after
resetting the unit. When resetting the unit, the display
will show the current step count.
SET button